Please, before you start working, read the instructions in the set, we tried to make it as simple and quick as possible to learn.
Prepare the work surface, remove all unnecessary from the table. You can cover the table with newspaper, paper, film.
You will also need a piece of cloth / rag. It is convenient to remove excess glue with a damp cloth.
Attention! The time of the glue "working capacity" is 15-20 minutes, it hardens in 2 hours. The product can be used in 24 hours, after the glue has completely dried. The glue in the liquid state has a white color, during gluing its color changes to purple, after complete drying the glue becomes transparent. Until the glue hardens, it is completely washed off with water (from hands, furniture, etc.), after hardening, the glue becomes waterproof! The adhesive is odorless, non-irritating to the skin, but unsafe in contact with the eyes and if swallowed.
Stones should be laid out in 1 layer, tightly to each other. If, after the glue dries, you find gaps between the stones, you can easily insert a pebble there by first dropping a drop of glue.
After placing the stones in a layer of glue and completely filling the segment, press the stones firmly against the wooden base. This can be done with a wooden stick. If excess glue comes out and gets on the wooden contour, it can be removed with a dry cloth.
1. Press the stones firmly against the plywood again. Lay the product to dry in a horizontal position. After 2 hours, you will be able to evaluate the preliminary results, check the presence / absence of empty spaces between the stones. Fill in them if necessary.
2. Thoroughly wash your hands and work surface.
3. DO NOT use leftover stones for food or cosmetic purposes (tinctures, powders, scrubs, etc.)
Fill one of the segments with glue. The glue is liquid, it should be applied in a thick layer - after drying, the glue will turn into a thin transparent film. Spread the adhesive evenly over the segment surface. The stones should be placed in a layer of glue, as in sour cream - the glue should "envelop" the stones from the sides, which will ensure reliable adhesion of the stones to the wooden base.
you need to do the work in stages
To get started, we recommend practicing with figures. If you have more than one child, you can give each one a figurine and help as needed.
Based on our experience, children from 7 years old cope on their own. This play set is not recommended for children under 3 years old.